850152
Electric motors; AC motors, multi-phase, of an output exceeding 750W but not exceeding 75kW
Country-Specific Tariff Codes
🇺🇸
United States
HTS
🇪🇺
European Union
TARIC
🇳🇴
Norway
Tariff
85015201
Of an output exceeding 750 W but not exceeding 15 kW
85015202
Of an output exceeding 15 kW but not exceeding 75 kW
85015203
Of an output exceeding 750 W but not exceeding 7.5 kW
85015204
Of an output exceeding 7.5 kW but not exceeding 22 kW
85015205
Of an output exceeding 22 kW but not exceeding 75 kW
🇬🇧
United Kingdom
UK Tariff
8501522010
For use in civil aircraft
8501522070
Automotive-ready brushless permanently excited magnet synchronous alternating current motor with:
-a specified speed of not more than 7000 rpm,
-an output of 750 W or more but not more than 1,8 kW (at 12 V),
-a flange diameter of 80 mm or more, but not more than 200 mm,
-a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end,
-a housing length of not more than 265 mm, measured from the flange to the outer end,
-a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface),
-a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets,
-whether or not with electronic power steering controller,
-whether or not with pulley or coupling,
-whether or not with rotor position sensor
8501522080
Electric permanent magnet synchronous motor with:
-an output power of 850 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the radius 26,2 mm and separated by an angle 30,0°,
-a housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard) and anodized coating (per ASTM B580 type E standard),
-a back electromotive force constant (Ke) of 0,04009 V-sec/rad or more but no more than 0,04431 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,36 % (of fundamental) and 7th of no more than 0,24 % (of fundamental),
-a cogging torque of no more than 20 mNm,
-a friction torque in ambient temperature of no more than 26,5 mNm,
-a maximum temperature of motor operation of no more than 200 °C
8501522089
Other
8501523010
For use in civil aircraft
8501523090
Other
8501529010
For use in civil aircraft
8501529090
Other
Related Subheadings
Need help classifying products into the right HS code?
Try ClassifyHQ