Electric motors; of an output not exceeding 37.5W

850110 Motors of an output not exceeding 37.5 W:

8501102000 Synchronous, valued not over $4 each

85011040 Other

8501104020 AC

8501104040 Brushless

8501104060 Other

8501104080 Other

85011060 Of 18.65 W or more but not exceeding 37.5 W

8501106020 AC

8501106040 Brushless

8501106060 Other

8501106080 Other

8501100000 Electric motors; of an output not exceeding 37.5W

8501101000

8501101010

8501101020

8501101040

8501101050

8501101060

8501101090

8501109100

8501109110

8501109190

8501109300

8501109310

8501109390

8501109900

8501109910

8501109920

8501109930

8501109940

8501109950

8501109956

8501109958

8501109960

8501109964

8501109965

8501109970

8501109975

8501109979

8501109990

85011000 Motors of an output not exceeding 37.5 W

85011000 Motors of an output not exceeding 37.5 W

8501101010 For use in certain types of aircraft

8501101020 Synchronous motor for a dishwasher with a water flow control mechanism with<br> <br><br><br>- a length without axle of 24 mm (+/- 0,3),<br> <br><br><br>- a diameter of 49,3 mm (+/- 0,3)<br> <br><br><br>- a rated voltage of 220 V AC or more but not more than 240 V AC,<br> <br><br><br>- a rated frequency of 50 Hz or more but not more than 60 Hz,<br> <br><br><br>- an input power of not more than 4 W,<br> <br><br><br>- a rotation speed of 4rpm or more but not more than 4,8rpm,<br> <br><br><br>- an output torque of not less than 10kgf/cm<br>

8501101040 Synchronous hybrid stepper motor with: -an output not exceeding 18 W, -two phases, -a rated current of not more than 2,5 A/phase, -a rated voltage of not more than 20 V, -with or without a threaded shaft, for use in the manufacture of 3D printers

8501101050 Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats

8501101060 Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats

8501101090 Other

8501109110 For use in certain types of aircraft

8501109190 Other

8501109310 For use in certain types of aircraft

8501109390 Other

8501109910 For use in certain types of aircraft

8501109930 Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats

8501109940 Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats

8501109950 Electric (DC) motor powering height adjusting with: -a rated output mechanical power not exceeding 35 W, -frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g, -a stall torque of 45 Nm and ultimate torque of 200 Nm, -a maximum current of 15 A, -no load speed of 7 RPM or more but not more than 10 RPM, -a rotation speed of 4 000 RPM or more but not more than 5 600 RPM, -a maximum noise level of 42 dB(A), -a maximum angular backlash up to 3 degrees, and -a 8 tooth pinion module, for use in the manufacture of automotive components for car's seats

8501109956 DC Motor: - with a speed rotation of not more than 7 000 rpm without load, - with a nominal voltage of not more than 18 V, - with a maximum power of 24 W, - for a specific temperature range from -40°C to 160°C, - with or without a gear connection, - with or without a mechanical attachment interface, - with 2 electrical connections, - with a maximum torque of 100 Nm

8501109958 DC Motor :<br> <br><br><br>- with a speed rotation of not more than 6500 rpm (without load),<br> <br><br><br>- with a nominal  voltage of 12 V (± 4 V),<br> <br><br><br>- with a maximal power below than 20 W,<br> <br><br><br>- with a specified temperature range from -40°C to 160°C,<br> <br><br><br>- with a worm gear drive,<br> <br><br><br>- with a mechanical attachment interface,<br> <br><br><br>- with 2 electrical connections,<br> <br><br><br>- with a maximum torque of 75 Nm<br>

8501109960 DC motor<br> <br><br><br>- with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded<br> <br><br><br>- with a power supply voltage of 100 V or more but not more than 240 V<br>for use in the manufacture of electric fryers

8501109964 DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (± 0,1), -of a specified temperature range of - 40 °C or more but not more than 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)

8501109965 Electric turbocharger actuator, with:<br> <br><br><br>- a DC motor,<br> <br><br><br>- an integrated gear mechanism,<br> <br><br><br>- a (pulling)force of 200 N or more at a minimum of 140°C elevated ambient temperature,<br> <br><br><br>- a (pulling) force of 250 N or more in each position of its stroke,<br> <br><br><br>- an effective stroke of 15 mm or more but not more than 25 mm,<br> <br><br><br>- with or without an on-board diagnostics interface<br>

8501109970 DC stepping motor, with - a two-phase winding, - a rated voltage of 9 V or more, but not more than 16,0 V - of a specified temperature range covering at least - 40 degC to + 105 degC - with or without connecting pinion - with or without motor drive connector

8501109975 Permanently excited DC motor with - a multiple-phase winding, - an external diameter of 24 mm or more but not more than 38 mm, - a rated speed of not more than 12 000 rpm, - a power supply voltage of 8 V or more but not more than 27 V, - with or without a pulley, - with or without a gear wheel

8501109979 DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°C to + 70°C

8501109990 Other