Vehicle parts; drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof

870850 Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof:

87085011 For tractors suitable for agricultural use

8708501110 Drive axles with differential, whether or not provided with other transmission components

8708501150 Non-driving axles

87085031 For other tractors

8708503110 Drive axles with differential, whether or not provided with other transmission components

8708503150 Non-driving axles

87085051 For vehicles of heading 8703

8708505110 Drive axles with differential, whether or not provided with other transmission components

8708505150 Non-driving axles

8708506100 Drive axles with differential, whether or not provided with other transmission components

8708506500 Non-driving axles

8708507000 For tractors suitable for agricultural use

8708507500 For other tractors

8708507900 Parts of non-driving axles

8708508100 Of cast iron

8708508500 Half-shafts

8708508900 Other

87085091 Parts of non-driving axles

8708509110 Spindles

8708509150 Other

8708509300 Of cast iron

8708509500 Half-shafts

8708509900 Other

8708500000 Vehicle parts; drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof

8708502000

8708502015

8708502018

8708502020

8708502025

8708502035

8708502050

8708502055

8708502070

8708502075

8708502080

8708503500

8708503511

8708505500

8708505511

8708505520

8708505550

8708505591

8708509100

8708509110

8708509111

8708509900

8708509910

8708509925

8708509935

8708509940

8708509945

8708509950

8708509960

8708509970

87085039 Other

87085089 Other

87085091 For the tractors of tariff item No. 8701.10.10, 8701.30.00, 8701.91.00, 8701.92.00, 8701.93.00, 8701.94.00 or 8701.95.90

87085099 Other

87085031 For the tractors of tariff item No. 8701.10.10, 8701.30.00, 8701.91.00, 8701.92.00, 8701.93.00, 8701.94.00 or 8701.95.90;

87085081 For installation in motor vehicles designed for the transportation and storage of veterinary equipment and preparations;

87085010 For the vehicles of heading 87.01

87085090 Other

8708502015 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

8708502018 Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87

8708502020 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle<br> <br><br><br>- of a length of  1 m or more but not more than 2 m,<br> <br><br><br>- of a weight of 6 kg or more but not more than 9 kg<br>

8708502025 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened

8708502035 Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened

8708502050 Double flange bearing of 3rd generation, for motor vehicles,<br><br><br><br>- with double-row ball bearing,<br><br><br><br>- whether or not with impulse (encoder) ring,<br><br><br><br>- whether or not with antilock brake system (ABS) sensor,<br><br><br><br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87

8708502055 Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened

8708502070 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:<br><br>-an outer diameter of 67,0 mm or more but not more than 84,5 mm,<br><br>-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,<br><br>- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,<br><br>-spline with 21 teeth or more but not more than 35,<br><br>-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves<br>

8708502075 Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees

8708502080 Specific pre-assembled or ready-to assemble sections for new mobile cranes

8708502090 Other

8708503511 Specific pre-assembled or ready-to assemble sections for new mobile cranes

8708503590 Other

8708505511 Specific pre-assembled or ready-to assemble sections for new mobile cranes

8708505520 Double flange bearing of 3rd generation, for motor vehicles,<br><br><br><br>- with double-row ball bearing,<br><br><br><br>- whether or not with impulse (encoder) ring,<br><br><br><br>- whether or not with antilock brake system (ABS) sensor,<br><br><br><br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87

8708505550 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

8708505591 Specific pre-assembled or ready-to assemble sections for new mobile cranes

8708505599 Other

8708509110 Double flange bearing of 3rd generation, for motor vehicles,<br><br><br><br>- with double-row ball bearing,<br><br><br><br>- whether or not with impulse (encoder) ring,<br><br><br><br>- whether or not with antilock brake system (ABS) sensor,<br><br><br><br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87

8708509111 Specific pre-assembled or ready-to assemble sections for new mobile cranes

8708509190 Other

8708509910 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle<br> <br><br><br>- of a length of  1 m or more but not more than 2 m,<br> <br><br><br>- of a weight of 6 kg or more but not more than 9 kg<br>

8708509925 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:<br><br>-an outer diameter of 67,0 mm or more but not more than 84,5 mm,<br><br>-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,<br><br>- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,<br><br>-spline with 21 teeth or more but not more than 35,<br><br>-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves<br>

8708509935 Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees

8708509940 Double flange bearing of 3rd generation, for motor vehicles,<br><br><br><br>- with double-row ball bearing,<br><br><br><br>- whether or not with impulse (encoder) ring,<br><br><br><br>- whether or not with antilock brake system (ABS) sensor,<br><br><br><br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87

8708509945 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened

8708509950 Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened

8708509960 Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened

8708509970 Specific pre-assembled or ready-to assemble sections for new mobile cranes

8708509990 Other