Electric motors and generators; parts suitable for use solely or principally with the machines of heading no. 8501 or 8502

850300 Parts suitable for use solely or principally with the machines of heading 8501 or 8502:

8503002000 Commutators

8503003500 For motors of under 18.65 W

8503004500 For generators suitable for use on aircraft

8503006500 Other

8503007500 For motors of under 18.65 W

8503009000 For generators suitable for use on aircraft

85030095 Other

8503009520 Parts of motors

8503009546 For AC generators (alternators) classified in statistical reporting number 8501.64.0110

8503009550 Other

8503009570 Parts of wind-powered generating sets classified in subheading 8502.31.00

8503009580 Other

8503000000 Electric motors and generators; parts suitable for use solely or principally with the machines of heading no. 8501 or 8502

8503001010

8503001090

8503002000

8503002010

8503002090

8503009110

8503009131

8503009199

8503009800

8503009810

8503009832

8503009833

8503009837

8503009840

8503009853

8503009855

8503009863

8503009873

8503009875

8503009899

85030010 Stators and rotors of the machines of heading 85.01

85030090 Other

85030000 Parts suitable for use solely or principally with the machines of heading 85.01 or 85.02.

8503001010 For use in certain types of aircraft

8503001090 Other

8503002010 For use in certain types of aircraft

8503002090 Other

8503009110 For use in certain types of aircraft

8503009199 Other

8503009810 For use in certain types of aircraft

8503009833 Stator for brushless motor of electrical power steering with a roundness tolerance of|50|μm

8503009837 Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements: - diameter of the rotor body of 15mm or more but not more than 37mm, - length of the rotor body of 12mm or more but not more than 36mm

8503009840 Pressure casted inner housing of a cooling channel system for an electrical motor: -of EN AC-47100 aluminum, -shot-blasted and machined, -leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), -with a tensile strength of 190 N/mm² or more, -with a height of 160 mm or more, but not more than 330 mm, -with a diameter of 240 mm or more, but not more than 368 mm, -with a weight of 3 kg or more, but not more than 5,84 kg

8503009853 Pressure casted rotor cover of the cooling channel system in the electrical motor: - of EN AC-47100-F aluminum, - with a sealing cap of stainless steel, - shot-blasted and machined, - leakproof to the degree of 1ml per minute or less under 2,75 bar pressure, - with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506), - with a tensile strength of 190 N/mm² or more, - with a height of 42mm or more, but not more than 64mm, - with a diameter of 88mm or more, but not more than 132mm, - with a weight of 0,3kg or more, but not more than 0,5kg

8503009855 Stator for brushless motor, with: -an internal diameter of 206,6 mm (± 0,5) -an external diameter of 265,0 mm (± 0,2) and -a width of 37,2 mm or more but not more than 47,8 mm of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums

8503009863 Pressure casted outer housing of an electrical motor: - of EN AC-47100 aluminum, - with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel, - shot-blasted and machined, - with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, - with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), - with a tensile strength of 190 N/mm² or more, - with a height of 195mm or more, but not more than 430mm, - with a width of 290mm or more, but not more than 625mm, - with a length of 270mm or more, but not more than 535mm, - with a weight of 5,2kg or more, but not more than 12,5kg

8503009873 Pressure die-cast electric motor stator housing: -of EN AC-46000 aluminium, -shot-blasted and machined, -with a height of 70 mm or more but not more than 76 mm, -with a width of 155 mm or more but not more than 162 mm, -with a weight of 330 g or more but not more than 360 g

8503009875 Stator body of stacked electrical sheet having: -an inner diameter of 18 mm or more, but not more than 35 mm, -an outer diameter of 35 mm or more, but not more than 65 mm, and -a length of 20 mm or more, but not more than 65 mm -whether or not incorporated in a housing

8503009899 Other