Transmission shafts (including cam shafts and crank shafts) and cranks

848310 Transmission shafts (including camshafts and crankshafts) and cranks:

84831010 Designed for use solely or principally with spark-ignition internal combustion piston engines or rotary engines

8483101010 For motorcycles

8483101030 Other

8483101050 Other

84831030 Other

8483103010 For vehicles of chapter 87

8483103050 Other

8483105000 Other transmission shafts and cranks

8483102100

8483102110

8483102190

8483102500

8483102510

8483102590

8483102900

8483102910

8483102990

8483105000

8483105010

8483105090

8483109500

8483109510

8483109530

8483109540

8483109550

8483109590

84831000 Transmission shafts (including cam shafts and crank shafts) and cranks

84831010 Cam shafts and crank shafts

84831090 Other

8483102110 For use in civil aircraft

8483102190 Other

8483102510 For use in civil aircraft

8483102590 Other

8483102910 For use in civil aircraft

8483102990 Other

8483105010 For use in civil aircraft

8483105090 Other

8483109510 For use in civil aircraft

8483109530 Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC

8483109540 Stepped shaft made of carbon steel with:  -rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5', -a largest diameter of 16 mm or more, but not more than 18 mm, -a length of 137 mm or more, but not more than 155 mm, -a weight of 0,12 kg or more, but not more than 0,28 kg

8483109550 Drum shaft for torque transmission, in steel (to SM45C for shaft standard and STS430 for ring standard) with: -a length of 137,8 mm or more but not more than 138,2 mm, -an outer diameter of 23 mm or more but not more than 48,025 mm, -a weight of 1,0245 kg or more but not more than 1,0445 kg, -a hardness of the shaft of 40 or more on the Rockwell C hardness scale (HRC), but not more than 50 HRC, -a ring hardness of 90 or more on the Rockwell B hardness scale (HRB), but not more than 120 HRB, -an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm

8483109590 Other