Taps, cocks, valves and similar appliances; parts thereof

848190 Parts:

8481901000 Of copper

8481903000 Of iron or steel

8481905000 Of other materials

84819090 Other

8481909020 Valve bodies

8481909040 Other

8481909060 Valve bodies

8481909081 Steel forgings

8481909085 Other

8481900000 Taps, cocks, valves and similar appliances; parts thereof

8481900010

8481900025

8481900050

8481900060

8481900070

8481900080

8481900090

84819000 Parts

84819010 Of cast iron

84819090 Other

8481900010 For use in certain types of aircraft

8481900025 Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features: -high-pressure die-cast aluminium EN AC-46000, -shot-blasted and machined, -height of 100 mm or more but not exceeding 135 mm, -width of 115 mm or more but not exceeding 150 mm, -weight of 210 g or more but not more than 500 g

8481900040 Valve armature: -|for the opening and closing of the flow of fuel, -|consisting of a shaft and a blade, -|with at least 3 but not more than 8 holes on the blade, -|made of metal and/or metal alloy(s)

8481900050 Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film

8481900060 Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute

8481900070 Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating

8481900080 Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm

8481900090 Other