CBP Ruling Database
Search past U.S. Customs and Border Protection classification rulings. Find precedent for your product and cite it in your own classification.
258320 rulings found
The tariff classification of a membrane horn switch and backplate from ScotlandDear Ms. Cook:In your letter dated August 25, 1999 you requested a tariff classification ruling.As indicated by the submitted samples and descriptive literature, the membrane horn switch, identified as part number 0113000310, KB1650, is the electrical circuit for an automobile horn. It consists of a membrane switch with attached electrical wiring. It is located underneath the air bag cover and sends a signal to the horn when the center of the steering wheel is depressed. The backplate, identified as part number 0113000410, KB 2438, is an elliptical shaped plastic piece that fits against the exposed side of the membrane horn switch and protects the circuit.The applicable subheading for the membrane horn switch will be 8536.50.9065, Harmonized Tariff Schedule of the United States (HTS), which provides for other electrical switches, for a voltage not exceeding 1,000 V. The rate of duty will be 2.7 percent a
The tariff classification of a membrane horn switch and backplate from ScotlandDear Ms. Cook:In your letter dated August 25, 1999 you requested a tariff classification ruling.As indicated by the submitted samples and descriptive literature, the membrane horn switch, identified as part number 0113000310, KB1650, is the electrical circuit for an automobile horn. It consists of a membrane switch with attached electrical wiring. It is located underneath the air bag cover and sends a signal to the horn when the center of the steering wheel is depressed. The backplate, identified as part number 0113000410, KB 2438, is an elliptical shaped plastic piece that fits against the exposed side of the membrane horn switch and protects the circuit.The applicable subheading for the membrane horn switch will be 8536.50.9065, Harmonized Tariff Schedule of the United States (HTS), which provides for other electrical switches, for a voltage not exceeding 1,000 V. The rate of duty will be 2.7 percent a
The tariff classification of L-Cystine (CAS 56-89-3) from Japan.
The tariff classification of L-Cystine (CAS 56-89-3) from Japan.
The tariff classification of a women’s tank top from Hong Kong
The tariff classification of a women’s tank top from Hong Kong
The tariff classification of spreader gift cards from China.
The tariff classification of spreader gift cards from China.
The tariff classification of spreader gift cards from China.
The tariff classification of spreader gift cards from China.
The tariff classification of spreader gift cards from China.
The tariff classification of spreader gift cards from China.
The tariff classification of a pair of girl’s woven trousers from Hong Kong.
The tariff classification of a pair of girl’s woven trousers from Hong Kong.
The tariff classification of mixtures of nuts from Lebanon.
The tariff classification of mixtures of nuts from Lebanon.
The tariff classification of Lower Adaptor from Dominican Republic.
The tariff classification of Lower Adaptor from Dominican Republic.
The tariff classification and status under the North American Free Trade Agreement (NAFTA), of a unisex knitted vest from Mexico; Article 509Dear Mr. Malloy:In your letter dated August 16, 1999, submitted on behalf of Timberline Colorado (d.b.a. Caretek), Denver, Colorado, you requested a ruling on the status of a unisex knitted vest from Mexico under the NAFTA.The submitted sample is returned as requested.The sample, Style SV97, is a unisex knitted vest that consists of 100% polyester fibers. The vest has oversized armhole openings that are finished with capping; a full-front, zippered opening; two slanted side pockets at the waist and an elasticized bottom. The fabric on the inside and the outside of the vest is napped. This fabric has more than nine stitches per two centimeters, measured in the direction in which the stitches were formed. On the garment there is also a high or stand-up collar.You describe the manufacturing process as follows:-the fabric for the body and collar i
The tariff classification and status under the North American Free Trade Agreement (NAFTA), of a unisex knitted vest from Mexico; Article 509Dear Mr. Malloy:In your letter dated August 16, 1999, submitted on behalf of Timberline Colorado (d.b.a. Caretek), Denver, Colorado, you requested a ruling on the status of a unisex knitted vest from Mexico under the NAFTA.The submitted sample is returned as requested.The sample, Style SV97, is a unisex knitted vest that consists of 100% polyester fibers. The vest has oversized armhole openings that are finished with capping; a full-front, zippered opening; two slanted side pockets at the waist and an elasticized bottom. The fabric on the inside and the outside of the vest is napped. This fabric has more than nine stitches per two centimeters, measured in the direction in which the stitches were formed. On the garment there is also a high or stand-up collar.You describe the manufacturing process as follows:-the fabric for the body and collar i
The tariff classification and status under the North American Free Trade Agreement (NAFTA), of a unisex knitted pullover from Mexico; Article 509Dear Mr. Malloy:In your letter dated August 16, 1999, submitted on behalf of Timberline Colorado (d.b.a. Caretek), Denver, Colorado, you requested a ruling on the status of a unisex knitted pullover from Mexico under the NAFTA.The submitted sample is returned as requested.Style SP97 is a unisex knitted pullover that consists of 100% polyester fibers. The fabric of the body and sleeves of the pullover is napped on both the inside and the outside, and it has more than nine stitches per two centimeters, measured in the direction in which the stitches were formed. The pullover features a shirt-type collar, a partial zippered front opening, an elasticized hemmed bottom and elasticized, hemmed sleeve cuffs. There are two side-seam pockets at the waist, as well.You describe the manufacturing process as follows:-the fabric for the body and collar i
The tariff classification and status under the North American Free Trade Agreement (NAFTA), of a unisex knitted pullover from Mexico; Article 509Dear Mr. Malloy:In your letter dated August 16, 1999, submitted on behalf of Timberline Colorado (d.b.a. Caretek), Denver, Colorado, you requested a ruling on the status of a unisex knitted pullover from Mexico under the NAFTA.The submitted sample is returned as requested.Style SP97 is a unisex knitted pullover that consists of 100% polyester fibers. The fabric of the body and sleeves of the pullover is napped on both the inside and the outside, and it has more than nine stitches per two centimeters, measured in the direction in which the stitches were formed. The pullover features a shirt-type collar, a partial zippered front opening, an elasticized hemmed bottom and elasticized, hemmed sleeve cuffs. There are two side-seam pockets at the waist, as well.You describe the manufacturing process as follows:-the fabric for the body and collar i
The tariff classification of a hollow screw with needle bearing from Germany.
The tariff classification of a hollow screw with needle bearing from Germany.
The tariff classification of a slate article from Canada
The tariff classification of a slate article from Canada
The tariff classification of a slate article from Canada
The tariff classification of a slate article from Canada
The tariff classification of roughly squared white pine veneer logs from CanadaDear Mr. Kalesnikoff:
The tariff classification of roughly squared white pine veneer logs from CanadaDear Mr. Kalesnikoff:
The tariff classification of 2-Chloro-4,5-Diaminopyrimidine (CAS 14631-08-4) from India.
The tariff classification of 2-Chloro-4,5-Diaminopyrimidine (CAS 14631-08-4) from India.
The tariff classification of 5-Bromo-2,3-Diaminopyridine from India.
The tariff classification of 5-Bromo-2,3-Diaminopyridine from India.
The tariff classification, country of origin requirements and status under the North American Free Trade Agreement (NAFTA), of a shadow box and a doll picture from Canada; Article 509
The tariff classification, country of origin requirements and status under the North American Free Trade Agreement (NAFTA), of a shadow box and a doll picture from Canada; Article 509
The tariff classification, country of origin requirements and status under the North American Free Trade Agreement (NAFTA), of a shadow box and a doll picture from Canada; Article 509
The tariff classification, country of origin requirements and status under the North American Free Trade Agreement (NAFTA), of a shadow box and a doll picture from Canada; Article 509
The tariff classification of "Twincore Joists" (wood beams with two particle board cores) from CanadaDear Ms. Fountaine:In your letter which was received on May 18, 1998 you requested a tariff classification ruling. The ruling was requested on behalf of Maibec Structures Inc.
The tariff classification of "Twincore Joists" (wood beams with two particle board cores) from CanadaDear Ms. Fountaine:In your letter which was received on May 18, 1998 you requested a tariff classification ruling. The ruling was requested on behalf of Maibec Structures Inc.
Drinking glass with ceramic stem; NY E80807
Drinking glass with ceramic stem; NY E80807
Electric garland with plastic light covers; Primal Lite, Inc. v. United States
Electric garland with plastic light covers; Primal Lite, Inc. v. United States
Protest 0901-98-100318; Primer Paints
Protest 0901-98-100318; Primer Paints
“Bio-Set” Infusion Device; NY D81573
“Bio-Set” Infusion Device; NY D81573
Protest 1303-97-100332; Fiberboard of Wood or Other Ligneous Materials, Whether or Not Bonded with Resins or Other Organic Substances
Protest 1303-97-100332; Fiberboard of Wood or Other Ligneous Materials, Whether or Not Bonded with Resins or Other Organic Substances